Figure 2-15. Fuel tank exploded view.
Section VII. MAINTENANCE OF THE EXHAUST SYSTEM
(2) To remove the exhaust pipe, remove the 2
screws and lockwashers attaching it to the engine
The exhaust system is comprised of a muffler, exhaust
exhaust manifold. Then loosen the clamp securing it
pipe, and tailpipe. The muffler is attached to the inside
to the muffler and remove the clamp and flange
of the left-hand frame member, adjacent to the engine.
The exhaust pipe connects the muffler to the engine
(3) To remove the tailpipe, loosen the clamp
exhaust manifold. The tailpipe carries the exhaust
securing it to the muffler and remove the rear clamp
gases from the muffler to the rear of the truck.
(not shown). Lift out the tailpipe and sleeve. (not
2-23. Muffler and Pipes
b. Installation. Reverse the procedure in a above.
a. Removal. Refer to figure 2-16 and remove the
Use a new flange gasket. Check for leaks.
muffler and pipes as follows:
(1) To remove the muffler, remove the exhaust
pipe (2) below and loosen the clamp securing the
tailpipe to the muffler. Lift out the muffler.