 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-611-35
(3) Tighten or replace loose or missing
(2) Install the splash pan (TM 10-3930-
mounting hardware, replace a damaged or defective
611-12).
part as necessary.
3-18. Drag Link
a. Removal.
reassemble the drag link.
e. Installation.
(1) Remove the pitman arm from the
(1) Refer to figure 3-21 and install the
steering gear (para 3-16).
steering linkage.
(2) Remove the battery (TM 10-3930-611-
(2) Install the battery (TM 10-3930-611-
12).
12).
(3) Refer to figure 3-21 and remove the
(3) Install the pitman arm on the steering
steering linkage.
gear (para 3-16).
f.
Adjustment.
Refer to figure 3-18 and
disassemble the drag link.
c. Cleaning, Inspection and Repair.
adjust the steering linkage.
(1) Clean all parts with dry cleaning
3-19. Steering Axle
solvent (Federal Specification P-D-680) and dry
a. Removal.
thoroughly.
(2) Inspect for breaks, cracks, bends,
(1) Remove pivot block mounting bolts.
damaged threaded areas, loose or missing mounting
(2) Disconnect steering booster from
hardware, or other defects.
steering axle (para 3-17).
3-22
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals