Click here to make tpub.com your Home Page

Page Title: Section IV. STEERING SYSTEM
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 10-3930-611-35
1.
Screw, set
9.
Bushing, rod
2.
Clevis
10.
Ring, back-up
3.
Screw, set (2 reqd)
11.
O-ring
4.
Gland
12.
Rod, piston
5.
Wiper, rod
13.
Piston
6.
Seal (1 set)
14.
Seal, piston
7.
Screw, set (ref item #3)
15.
Housing, cylinder
8.
Head
Figure 3-16. Tilt cylinders, disassembly, and reassembly.
Section IV. STEERING SYSTEM
3-15. General
This section provides information useful in the
maintenance and repair of the steering system of the
forklift truck.
3-16. Steering Gear Assembly
a.  Removal.
(1) Remove the front floor plates (TM 10-
3930-611-12).
(2) Remove the pitman arm and steering
gear assembly (fig. 3-17).
b.  Disassembly.  Refer to figure 3-18 and
disassemble the steering gear assembly.
c.  Cleaning, Inspection and Repair.
(1) Clean all parts with dry cleaning
solvent  (Federal  Specification  P-D-680)  and  dry
thoroughly.
(2) Inspect for breaks, cracks, dents, worn
or chipped gear teeth, or other defects.
(3) Replace a damaged or defective part
as necessary.
d.  Reassembly.  Refer to figure 3-18 and
reassemble the steering gear assembly.
e.  Installation.
Figure 3-17. Pitman arm and steering gear assembly,
(1) Install the steering gear assembly and
removal and installation.
pitman arm (fig. 3-17).
(2) Install the front floor plates (TM 10-
c.
Cleaning, Inspection and Repair.
3930-611-12).
f.
Adjustment.
Adjust the steering gear
(1) Clean all parts with dry cleaning
assembly (TM 10-3930-611-12).
solvent  (Federal  Specification  P-D-680)  and  dry
thoroughly.
3-17. Steering Booster
(2) Inspect for breaks, cracks, loose or
a.  Removal.
missing mounting hardware, damaged seals, or other
(1) Remove the splash pan (TM 10-3930-
defects.
611-12).
(3) Tighten or replace loose or missing
(2) Refer to figure 3-19 and remove the
mounting hardware, replace a damaged seal or part as
steering booster.
necessary.
b.  Disassembly.  Refer to figure 3-20 and
d.  Reassembly.  Refer to figure 3-20 and
disassemble the steering booster.
reassemble the steering booster.
e.  Installation.
(1) Refer to figure 3-19 and install the
steering booster.
3-21

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business