Side Shift Hydraulic Cylinder

3-79. Side Shift Hydraulic Cylinder

e. Inspection.

(1) Inspect shell assembly for damage.

a. General. The purpose of the side shift cylinder

(2) Inspect rod for nicks and scratches.

is to move the fork on the fork carriage either t the

(3) Inspect end nut for cracks.

right or left. This is accomplished by means of a

(4) Inspect piston for scratches.

c h a i n and sprocket set up attached to the cylinder,

(5) Remove scratches with crocus cloth.

fork carrier and forks. When the cylinder is ac-

(6) Replace a defective part.

tuated the chain is moved. The forks which are

f. Reassembly. Refer to figure 3-157 and

attached to the chain are moved also.

reassemble the side shift cylinder.

b. Removal. Refer to figure 3-156 and remove

g. Test. R e f e r t o p a r a g r a p h 3 - 6 4 c a n d t e s t t h e

the side shift cylinder.

cylinder.

c. Disassembly. Refer to figure 3-157 and

h . Installation. Refer to figure 3-156 and install

disassemble the side shift cylinder.

the side shift cylinder.

d . Repacking Cylinder. Refer to paragraph 3 - 6 4 c

for repacking procedures.

Figure 3-156. Side shift Cylinder, removal and installation.