4-27. Fan Guard
4-26. Coolant Hoses and Fittings
a. Removal. Refe to figure 4-14 and remove fan
a. Removal. Drain the cooling system. Refer to
figure 4-13 and remove coolant hoses and fittings.
b. Inspection. Inspect the fan guard for cracks
b. Clean and Inspection.
and breaks. Replace a defective fan guard.
(1) Clean hose fittings and gasket surfaces.
c. Installation. Refer to figure 4-14 and install
(2) Inspect fittings and surfaces for cracks and
damage. Inspect hoses for deterioration and cuts.
Replace defective parts and hoses.
c. Installation. Refer to figure 4-13 and install
coolant hoses and fittings. Refill cooling system.
Figure 4-13. Coolant hoses and fittings, removal and installation.
Figure 4-14. Fan guard, removal and installation.