 |
|||
|
|
|||
|
Page Title:
Figure 70. Handbrake installed on truck. |
|
||
| ||||||||||
|
|
 TM 10-3930-222-20
62. Handbrake and Linkage
(4) Remove the drive wheels and disconnect
the handbrake cables (10) at the toggle
Refer to figures 70 and 71 and remove handbrake
lever at the brakeshoes.
assembly as follows:
(5) Remove the capscrews and lockwashers
that secure the cable bracket to the wheel
backing plate and remove the cable and
a. Removal.
bracket from the truck.
(1) Release the handbrake.
(6) Loosen the screw, nut, and washer that
(2) Remove the cotter pin (7, fig. 71) and
secure clamp (9) to truck.
withdraw rod end pin (11) from equalizer
(7) Remove the handbrake cables from
bar (8).
equalizer bar.
(3) Remove the capscrews (12) and
lockwashers (13) that secure the
handbrake lever (2) to the truck and
b. Installation. Reverse procedures in a above.
remove the handbrake lever.
c. Adjustment. See TM 10-3930-222-10.
Figure 70. Handbrake installed on truck.
113
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals