Figure 24. Fuel pump installed on truck.

TM 10-3930-222-20

Figure 24. Fuel pump installed on truck.

b. Installation and Adjustment.

(4) Remove the front floor board with the pedal

assembly.

(1) Reverse procedures in a above.

(5) Unscrew the capscrew (3), lockwasher (2), and

(2) To adjust the accelerator linkage, have the

nut (16) that secure pedal (1) to the lever (15)

pedal in return position and the carburetor

and remove the pedal.

throttle in closed position and proceed as

follows:

(6) Remove the roll pin (17) that secures the lever

to the crank and remove the washer (18) and

(a) Loosen the lock nut (6, fig. 28).

lever from the end of the crank.

(b) Aline the rod end (4) with hole in crank,

(7) Remove the roll pin (13) and washer (14) that

insert the pin (10) and secure with cotter

secure crank to the floor plate.

pin (11).

(8) Disconnect the spring (9) and remove the crank

from the plate.