ARCTIC HEATER KIT INSTALLATION - continued

TM 10-3930-673-34

(21) Secure fuel suction hose to bend of forward

fender bracket with one large tie wrap.

(22) Secure fuel suction hose to vehicle fuel hose

and vehicle hydraulic hoses with small tie

wraps.

(23) Route fuel pressure hose (37) attached to

heater assembly (14) down under heater and

across top of heater mounting bracket (6) to

fuel pump (26).

(24) Connect fuel pressure hose (37) to top of fuel

pump (26) with clamp (38).

(25) At left-rear of engine, remove 1/2 in. pipe

plug (39) from side of water inlet (40).

Discard pipe plug.

(26) Apply sealing compound to threads of shut-

off valve (41) and install valve on water inlet

(40) in position shown. Leave valve in OPEN

position.

(27) Connect heater inlet hose (42) on shut-off

valve (41) and install hose clamp (43). Secure

hose to turbocharger oil tube (44) with large

tie wrap.

Change 1

17-7