ARCTIC HEATER KIT INSTALLATION - continued

TM 10-3930-673-34

(10) Position fuel pump (26) into holder (27) with

wire connector of fuel pump facing upward.

(11) Install holder (27) with fuel pump (26) on stud

of heater mounting bracket (6) with washer

(28) and locknut (29).

WARNING

Do not smoke or allow open flame or sparks in the vicinity while working on any part of fuel system.

Diesel fuel is highly flammable and can cause injury or death to personnel if accidentally ignited.

(12) Disconnect fuel hose (30) from elbow (31) at

side of fuel/hydraulic tank (18).

(13) Remove elbow (31) from fuel/hydraulic tank

(18). Discard elbow.

Change 1

17-5