BOOM EXTEND CYLINDER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

16-18. BOOM EXTEND CYLINDER REPLACEMENT/REPAIR (CONT)

e. Assembly.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

NOTE

Wipe all sealing surfaces on cylinder

clean and dry. Apply film of clean

hydraulic oil to all seals as they are

TR01438

installed.

Apply sealing compound to threads of

rod and nut.

(1)

Assemble boom extend cylinder (2) parts (38 through 52).

(a)

Install seal (51) and rod wiper (52) inside of gland (39).

(b)

Install back-up ring (50) and preformed packings (42 and 49) on outside diameter of gland (40).

(c)

Install gland (40) and tube (48) on rod (39).

16-104