INTERMEDIATE BOOM REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

16-13. INTERMEDIATE BOOM REPLACEMENT/REPAIR (CONT)

NOTE

Perform steps 7 and 8 for each of two

wear pads.

(7)

At inside of outer boom (4), position three

shims (8), spacer (7), three inserts (6), and

wear pad (5).

(8)

Apply sealing compound to threads of three

screws (1).

(9)

Secure wear pad (5) to outer boom (4) with

three washers (3), new lockwashers (2), and

screws (1). Tighten screws to 30 lb-ft (40.67

Nm).

TR01349

(10) Push intermediate boom (9) into outer boom

(4).

(11) Remove lifting straps supporting

intermediate boom and move other forklift

and overhead lifting device away from work

area.

(12) Position ropes at rear of boom down through intermediate boom.

NOTE

Follow-on Maintenance: Install inner boom (Para 16-12).

END OF TASK

16-72

Change 1