BOOM ASSEMBLY REPLACEMENT - continued

TM 10-3930-673-34

16-11. BOOM ASSEMBLY REPLACEMENT (CONT)

(13)

Start engine and raise boom assembly (6) as

required to access hoses (14 through 16).

Stop engine.

WARNING

Remove hose caps carefully prior to

connecting hoses. Hydraulic oil may be

under pressure and can spray from hoses

causing bodily injury.

TR01366

(14) Connect hoses (14 through 16) to fittings (17

through 19) at underside of boom assembly

(6).

(15) Start engine and lower boom assembly (6)

until horizontal. Stop engine.

(16) Connect two hoses (7 and 8) to elbows (9 and

10).

(17) Connect boom electrical cable (1) to socket

(2) on vehicle frame.

TR01363

(18) Position two hoses (7 and 8) under boom

assembly (6). Install four clamp halves (13),

TR01363

screw (12) and new locknut (11).

TR01365

16-50

Change 1