FRAME TILT VALVE REPAIR - continued - TM-10-3930-673-340607

TM 10-3930-673-34

(c)

Remove washer (12) and disk

assembly (13) from shaft (14).

(d)

Remove shaft (14) from cap (4).

(e)

Remove bearing race (15),

bearing (16), and stop plate (17)

from cap (4).

(f)

Remove preformed packing (18) and

back-up ring (19) from cap (4).

Discard preformed packing.

(g)

If damaged, remove stop pin (20)

from cap (4).

b. Cleaning. See Cleaning Instructions

c. Inspection. See Inspection Instructions

d. Assembly.

TR01032

NOTE

Wipe all sealing surfaces of valve clean and dry. Apply film of clean hydraulic oil to all

seals as they are installed.

(1)

Install shaft (14) in cap (4) with parts (1, 2, 3, and 20).

(a)

If removed, install stop pin (20) in cap (4).

(b)

Install back-up ring (19) and preformed packing (18) in bore of cap (4).

(c)

Slide shaft (14) through hole in cap (4).

16-31