 |
|||
|
|
|||
|
Page Title:
TANDEM GEAR PUMP REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
16-3. TANDEM GEAR PUMP REPAIR (CONT)
(4)
Remove gear housing (19) and
33
18
parts (26 through 29) from end
27
34
cover (30).
30
NOTE
Dowel pins will remain in gear
31
housing or end cover.
28
(a)
Remove gear housing (19) from end
32
cover (30).
(b)
Remove two seals (26) from gear
housing (19). Discard seals.
29
(c)
Remove thrust plate (27) and
seal (28) from gear housing (19).
Discard seal.
26
(d)
If damaged, remove dowel pins (29)
from gear housing (19) or end
29
19
cover (30).
26
(5)
Remove parts (18, and 31 through 34)
TR00794
from end cover (30).
CAUTION
Do not grip on or near any machined surfaces during disassembly or assembly. Failure to
follow this precaution will cause part damage.
(a)
Place end cover (30) in a vise with mounting side face down.
(b)
Insert fabricated seal removal tool into notch between seal (31) and end cover (30). Tap seal
out to remove from end cover. Discard seal.
(c)
If damaged, remove plug (32) from end cover (30).
(d)
If damaged, remove two screws (33) and plate (34) from end cover (30).
(e)
Remove four studs (18) from end cover (30).
16-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals