AIR CONDITIONER COMPRESSOR CLUTCH REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

TR01361

(4)

Install retaining ring (22) on rotor (18).

(5)

Install cover (21), shims (19), and key (20) on rotor (18).

(6)

Install armature plate (17) on rotor (18).

(7)

Install locknut (16) on compressor (7) shaft. Tighten locknut to 20-25 lb-ft (27-34 Nm).

(8)

Measure armature plate (17) to rotor

assembly (18) gap.

Using a feeler gauge measure gap around

armature plate (17) and rotor

assembly (18). If gap is less than 0.016 in.

(0.4 mm) or greater than 0.031 in.

(0.8 mm) gently pry up on armature plate

or tap down on armature plate. If gap is

still not within specification remove

armature plate and replace shims (19).

(9)

Add same amount of refrigerant oil

as was removed in disassembly

Step (1).

(10)

Install plug (15) in compressor (7).

TR01362

15-35