AIR CONDITIONER COMPRESSOR CLUTCH REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

TR01355

(2)

Remove locknut (16) from compressor (7) shaft using spanner wrench to hold armature

plate (17). Discard locknut.

(3)

Remove armature plate (17) using a suitable puller from rotor (18).

NOTE

Number of shims may vary.

(4)

Remove shims (19), key (20), and cover (21) from rotor (18). Discard key.

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(5)

Remove retaining ring (22) from rotor (18). Discard retaining ring.

(6)

Remove rotor (18) using a suitable puller from field coil assembly (23).

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(7)

Remove retaining ring (24) from field coil assembly (23). Discard retaining ring.

(8)

Loosen wire hold down screw and remove field coil assembly (23) from compressor (7).

15-33