 |
|||
|
|
|||
|
Page Title:
FRONT DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/ADJUSTMENT - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
8-5. FRONT DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/
ADJUSTMENT (CONT)
a. Removal.
(1)
Remove axle shafts (1) from axle
housing (2).
(2)
Remove differential carrier (3) from
axle housing (2).
(a)
Tip axle assembly so that front
differential carrier (3) faces up.
TR00002
(b)
Reinstall companion flange (4),
washer (5), and nut (6) removed
8
with park brake assembly. Drive
yoke will provide a lifting point for
7
2
differential carrier (3) during
removal.
6
NOTE
Screws from differential carrier to
axle housing are of three different
12
3
sizes. Note size, location and
quantity of screws when removing
5
4
9
for ease of assembly.
10
11
(c)
Remove 12 screws (7), washers (8),
two screws (9), screws (10), and four
washers (11) from differential
carrier (3).
(d)
Use leather or rubber mallet to
loosen differential carrier (3) in axle
1
housing.
(e)
Use suitable sling placed around
bevel pinion (12), behind companion
flange (4), to lift and support differential carrier (3) during removal.
(f)
Remove differential carrier (3) from axle housing (2).
(g)
Place differential carrier (3) on stand or bench, ring gear up, and clamp securely.
(h)
Remove companion flange (4), nut (6), and washer (5) from bevel pinion (12).
8-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals