TRANSMISSION OIL PUMP REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(2)

Disassemble transmission oil pump (2) parts (14 through 28).

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under spring tension

and can act as projectiles when released and could cause severe eye injury.

(a)

Remove snap ring (14) from end of shaft (15).

(b)

Use a gear puller to pull gear (16) with bearing (17) from end of shaft (15).

(c)

Scribe retainer (18) and transmission oil pump (2). These marks will be used during assembly.

(d)

Remove screws (19) and retainer (18) from transmission oil pump (2).

(e)

Remove two piece geroter (20).

(f)

Remove bearing (21) from retainer (18).

(g)

Remove woodruff key (22) from keyway

in shaft (15).

(h)

Remove sleeve adapter (23) and sleeve

spacer (24).

(i)

Remove shaft (15) and thrust race (25).

(j)

Remove bearing (26) from transmission

oil pump (2) housing.

(k)

Remove screw (27) and expansion plug

(28) from transmission oil pump (2).

c. Cleaning. See Cleaning Instructions (Para 2-12).

d. Inspection. See Inspection Instructions (Para 2-14).

7-65