TRANSMISSION CONTROL VALVE REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

7-9. TRANSMISSION CONTROL VALVE REPLACEMENT/REPAIR (CONT)

(t)

Install pressure valve

assembly (13), spring guide (12),

and return spring (11) in

transmission control valve (3).

(u)

Install preformed packing (10) on

plug (9) and install plug in

transmission control valve (3).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

TR00242

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and water.

(2)

Apply sealing compound to threads of neutral safety switch (8) and install in

transmission control valve (3).

f. Installation.

(1)

Install transmission valve (3) in front

cover (4).

(a)

Install two springs (6) and detent

balls (5) in back of transmission

control valve (3).

(b)

Install gasket (7) on front cover (4).

CAUTION

Use care when installing

transmission control valve so as to

not lose detent balls and spring.

(c)

Install transmission control

valve (3) over gasket (7).

TR00241

(2)

Install 13 washers (2) and screws (1)

on transmission control valve (3) and

front cover (4).

NOTE

Follow-on Maintenance: Install transmission assembly (Para 7-4).

END OF TASK

7-62