TRANSMISSION CONTROL VALVE REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(h)

Remove stem assembly (24) (range

selector spool) from transmission

control valve (3).

(i)

Remove cap (25) and preformed

packing (26) from transmission

control valve (3). Discard preformed

packing.

(j)

Remove nut (27) and spacer (28)

from stem (29).

(k)

Remove stem (29) (directional spool)

and oil seal (30) from transmission

control valve (3).

TR00244

(l)

Remove plug (31) and preformed

packing (32) from transmission

control valve (3). Discard

preformed packing.

(m) Remove dump valve spring (33)

and dump valve (34) from

transmission control valve (3).

(n)

Depress accumulator piston (35)

and remove roller (36).

(o)

Remove plug (37) and preformed

packing (38) from transmission

control valve (3). Discard

preformed packing.

TR00245

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(p)

Remove snap ring (39), orifice plate (40), spool (41), and shims (42) from transmission control

valve (3).

(q)

Remove accumulator piston (35), accumulator spring (43), and washer (44) from other end

transmission control valve (3).

(r)

If damaged, remove eight plugs (45) and one ball (46) from transmission control valve (3).

c. Cleaning. See Cleaning Instructions (Para 2-12).

7-59