TRANSMISSION INPUT SHAFT REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(2)

Remove three screws (11) and

transmission shaft (12) as an

assembly from front cover (1).

b. Disassembly.

(a)

Remove seal ring (13) from input

shaft (12).

WARNING

TR00240

Use care when removing snap and

retaining rings. Snap and retaining

rings are under spring tension and

can act as projectiles when released

and could cause severe eye injury.

(b)

Remove snap ring (14) and ball bearing (15) from input shaft (12).

(c)

Remove bearing retainer (16) from input shaft (12).

c. Cleaning. See Cleaning Instructions (Para 2-12).

d. Assembly.

(1)

Install bearing retainer (16) on input shaft (12). Ensure that flat side of bearing retainer

faces away from input shaft gear.

WARNING

Use care when installing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(2)

Install ball bearing (15) and snap ring (14) on input shaft (12).

(3)

Install seal ring (13) on input shaft (12).

e. Installation.

(1)

Install input shaft (12) as an assembly in front cover (1).

(a)

Apply grease to seal ring (13) to center it on input shaft (12).

(b)

Install input shaft (12) as an assembly through bore in back of front cover (1). Ensure that

bearing retainer (16) is placed with flat side against front cover.

7-55