TRANSMISSION FRONT COVER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(4)

Remove auxiliary pump drive assembly

parts (32 through 39) from front cover (1).

WARNING

Use care when removing snap and

retaining rings. Snap and retaining rings

are under spring tension and can act as

projectiles when released and could cause

severe eye injury.

(a)

Remove snap ring (32) and auxiliary

pump gear (33) from shaft (34).

(b)

Use a punch to strike shaft (34) until

cover (35) comes off and shaft can be

removed from front cover (1).

(c)

Remove snap ring (36) from front cover

(1).

TR00234

(d)

Remove bearing (37) from shaft (34).

(e)

Remove bearing (38) and snap ring (39) from front cover (1).

(5)

If damaged, remove parts (40 through 45) from front cover (1).

(a)

If damaged, remove two plugs (40) from front cover (1).

(b)

If damaged, remove sleeve (41) from front cover (1).

(c)

If damaged, remove three screws (42) and oil passage cover (43) from front cover (1).

(d)

If damaged, remove four screws (44) and identification plate (45) from front cover (1).

(e)

If damaged, remove breather (46) front cover (1).

c. Cleaning. See Cleaning Instructions (Para 2-12).

d. Inspection. See Inspection Instructions (Para 2-14).

7-45