TRANSMISSION FRONT COVER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(2)

Remove screws (2, 3, and 4), three screws (5),

and four screws (6) from front cover (1) and

main case (7).

CAUTION

Use care when removing cover assembly.

Clutch packs must remain in housing or

clutch packs could be damaged during

removal.

(3)

Using hoist or suitable lifting device lift front

cover (1) off main case (7).

(4)

Place front cover assembly (1) on suitable

supports.

(5)

Remove gasket (8) from main case (7).

Discard gasket.

TR00229

b. Disassembly.

(1)

Remove bearing retainer (10) and parts (9

and 11 through 13) from front cover (1).

(a)

Remove seven screws (9) and bearing

retainer (10) from front cover (1).

(b)

Remove oil seal (11) from bearing

retainer (10).

WARNING

TR00231

Use care when removing snap and

retaining rings. Snap and retaining rings

are under spring tension and can act as

projectiles when released and could cause

severe eye injury.

(c)

Remove retaining ring (12) and bearing (13) from bearing retainer (10).

(d)

Remove Permatex gasket material between bearing retainer (10) and front cover (1).

7-43