 |
|||
|
|
|||
|
Page Title:
TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
7-4. TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR (CONT)
(12) Connect transmission cables (13 and
14) to transmission control
valve (15).
(a)
Connect transmission cables (13
and 14) to transmission control
valve.
NOTE
Ensure that cables are connected
correctly for proper function.
(b)
Install four nuts (18) that secure
clamps for transmission cables (13
and 14).
(c)
Install washer (17) and cotter
pin (16) for each transmission
TR00194
cable (13 and 14) at transmission
control valve (15).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
TR00003
or death, keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(13)
Apply sealing compound on
threads of four screws (10). Slide
yoke of transmission propeller
shaft (12) toward transmission (3)
input yoke and secure with four
lockwashers (11) and screws.
Tighten screws to 45 lb-ft
(61.0 Nm).
TR00193
7-40
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals