 |
|||
|
|
|||
|
Page Title:
TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
(m) Remove preformed packing (74) and
outer piston seal (75) from
piston (73). Discard preformed
packing and seal.
(n)
Turn shaft assembly (59) over and
repeat Steps (b) through (m).
TR00207
(6)
Disassemble second stage clutch
pack (56) parts (76 through 97).
CAUTION
Use care when removing seal rings
to prevent clutch shaft damage.
(a)
Remove three seal rings (76) from
shaft assembly (77).
TR00208
(b)
Use two pry bars, 180 apart, to pry
bearing (78) up and remove it from
shaft assembly (77).
WARNING
Use care when removing snap and
retaining rings. Snap and retaining
rings are under spring tension and
can act as projectiles when released
and could cause severe eye injury.
(c)
Remove snap ring (79) from shaft
assembly (77).
(d)
Use a gear puller to remove weld
gear (80) and bearing (81) as an
assembly from shaft
assembly (77).
TR00209
7-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals