TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

7-4. TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR (CONT)

CAUTION

Wipe area clean around all

hydraulic connections to be opened

during removal. Cap oil lines and

plug holes after removing lines.

Contamination of the hydraulic

system could result in premature

failure.

NOTE

If more than one hydraulic line is

to be removed, identify lines to

assure proper installation. Use

suitable container to catch any

hydraulic oil that may drain from

the system.

Remove tie wraps as necessary

(6)

Tag, mark, and disconnect hoses (19,

20, and 21).

(a)

Tag, mark, and disconnect hose (19)

from transmission control

valve (15).

(b)

Tag, mark, and disconnect two

hoses (20) from transmission (3).

(c)

Tag, mark, and disconnect two

hoses (21) from transmission (3).

(7)

Tag, mark, and disconnect lead (22)

from transmission temperature

sender (23).

(8)

Remove transmission oil filler

tube (24) from transmission (3).

TR00195

7-12