MAIN WIRING HARNESS REPLACEMENT - continued

TM 10-3930-673-34

b. Installation.

(1)

Secure main wire harness (23) with four cable clamps (18), four lockwashers (l7), four

nuts (16), and four screws (15).

(2)

Insert wire harness branches through holes in frame and install four grommets (19).

(3)

Connect connectors (20, 21, and 22) to original locations.

(4)

Connect ground terminal rings (6 and 7), install five nuts (12) five lockwashers (l3), and

five flat washers (l4).

(5)

Connect four terminal rings (4), two terminal rings (5), eight terminal rings (6), terminal

ring (7), twelve terminal rings (8), terminal ring (9), terminal ring (10), terminal ring

(11), and terminal ring (24) to devices indicated.

(6)

Plug in 25 male connectors (l), three spade terminals (2), and female receptacle (3) to

devices indicated.

NOTE

Follow-on Maintenance: Connect negative battery cable (TM 10-3930-660-20).

END OF TASK

6-27