TURBOCHARGER ASSEMBLY REPAIR - continued

TM 10-3930-673-34

4-6. TURBOCHARGER ASSEMBLY REPAIR (CONT)

(12)

Apply engine oil to thrust

bearing (29).

(13)

Install thrust bearing (29) in bearing

housing (14).

(14)

Install seal ring (26) on oil

slinger (25).

(15)

Apply engine oil to oil slinger (25).

(16)

Install oil slinger (25) in oil seal

plate (24).

(17)

Install oil baffle (27) in oil seal

plate (24).

(18)

Install preformed packing (28) on oil

seal plate (24).

CAUTION

When installing oil slinger ensure

TR01389

balance mark on collar is aligned

with shaft and wheel balance mark.

Failure to align balance marks could

cause premature component failure.

(19)

Install oil seal plate (24) in bearing housing (14).

WARNING

Use care when installing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(20)

Install retaining ring (23) in bearing housing (14).

4-28