ENGINE OIL COOLER AND FILTER BASE REPLACEMENT

TM 10-3930-673-34

(5)

Remove filter head (5), gasket (9), cooler core (10), and gasket (11). Discard gaskets.

(6)

If damaged, remove bypass valve (12) from filter head (5).

b. Cleaning. See Cleaning Instructions (Para 2-12).

c. Inspection. See Inspection Instructions (Para 2-14).

d. Installation.

(1)

If removed, install bypass valve (12) in filter head (5) using a mallet and suitable driver.

(2)

Install gasket (11), cooler core (10), gasket (9), filter head (5), and 14 screws (8). Tighten

screws to 216 in-lb (24.40 Nm).

(3)

Connect turbocharger supply line (6) to top of filter head (5).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(a)

If removed, apply sealing compound to threads of adapter (7). Install adapter (7).

(b)

Connect turbocharger supply line (6) to adapter (7).

(4)

If removed, install plunger (4), compression spring (3), preformed packing (2), and

plug (1) in filter head (5). Tighten plug to 60 lb-ft (81.35 Nm).

NOTE

Follow-on Maintenance:

Install oil filter (TM 10-3930-673-20).

Fill cooling system (TM 10-3930-673-20).

END OF TASK

3-149/(3-150 blank)