ENGINE OIL PUMP INLET TUBE REPLACEMENT

TM 10-3930-673-34

d. Installation.

(1)

Install gasket (8) oil pump inlet tube (7) and screws (5 and 6). Tighten screws to 216 lb-in

(24.40 Nm).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(2)

Coat both sides of gasket (4) with sealant.

NOTE

Install special washers with concave side towards oil pan.

(3)

Install gasket (4), oil pan (1), 36 washers (3), and screws (2). Tighten screws to 216 lb-in

(24.4 Nm).

NOTE

Follow-on Maintenance:

Fill engine with oil (TM 10-3930-673-20).

Connect negative battery cable (TM 10-3930-673-20).

END OF TASK

3-143