 |
|||
|
|
|||
|
Page Title:
CAMSHAFT, CAMSHAFT GEAR, AND CAMSHAFT BUSHING REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
(d)
Check oil hole alignments by
inserting a 0.128 in. (3.25 mm)
diameter rod into bushing oil
hole (9) and insuring that rod can
also enter oil hole (8) in camshaft
bushing (6) if oil hole alignment is
unsatisfactory.
NOTE
The specified rod diameter
represents the minimum sized oil
passage required for adequate
camshaft bushing lubrication.
(2)
Apply Lubriplate 105 to camshaft
bores in cylinder block and to lobes
of camshaft.
(3)
Install camshaft (3), camshaft
gear (1), and thrust plate (5).
(a)
Position camshaft (3), camshaft
gear (1), and thrust plate (5) in
cylinder block.
(b)
Align timing marks on camshaft
gear (1) with timing mark on
crankshaft gear (2).
(c)
Install screws (4) in thrust plate (5).
Tighten screws to 216 lb-ft
(292.86 Nm).
NOTE
Follow-on Maintenance:
Install rocker arm levers (Para 3-18).
Install fuel transfer pump
(TM 10-3930-673-20).
Install front housing cover
TR01777
(TM 10-3930-673-20).
Install oil pan (Para 3-23).
END OF TASK
3-131
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals