CRANKSHAFT REAR SEAL REPLACEMENT - continued

TM 10-3930-673-34

3-11. CRANKSHAFT REAR SEAL REPLACEMENT (CONT)

TR01038

CAUTION

Tap alignment/installation tool at the 12, 3, 6, and 9 o'clock positions only. Striking the

tool at other locations could damage the seal carrier.

(5)

Use alignment/installation tool supplied with seal kit to move oil seal (1) to correct

depth in the housing.

(a)

Place alignment/installation tool supplied with rear seal kit onto crankshaft and against seal

carrier with the flange of the tool away from the seal.

(b)

Use a hammer to tap seal into seal retainer until flange of tool is against seal retainer.

NOTE

Follow-on Maintenance: Install flywheel (Para 3-14).

END OF TASK

3-92