Installation-CONT. - TM-10-3930-673-20-20634

TM 10-3930-673-20-2

18-18. ATTACHMENT REPLACEMENT (CONT)

NOTE

Adjust lifting device as required to take

weight off pin during installation.

(3)

Apply anti-seize compound to pin (18).

TR00004

NOTE

Pin will be fully installed when carriage

tilt cylinder is installed.

(4)

As required, install one or more shim

washers (19) between attachment (1) and

boom (20). Install pin (18) part way into bore

of attachment and boom.

(4.1) Install carriage tilt cylinder (Para 18-14).

(4.2) Apply anti-seize compound to pin (17).

WARNING

TR00642

Support attachment cylinder with suitable

lifting device when installing attachment.

Failure to do so may cause severe

personal injury and damage to cylinder.

(4.3) Connect rod end of attachment lift cylinder

(14) to attachment (1) with pin (17), screw

(16) and new locknut (15). Remove lifting

strap.

18-100

Change 1