Installation-CONT. - TM-10-3930-673-20-20619

TM 10-3930-673-20-2

(6)

Install carriage tilt cylinder (3) in attachment

(10.1).

(a)

Apply anti-seize compound to cylinder pivot

pin (13).

(a.1) Position shim washer(s) (13.1) as required,

between attachment (10.1) and boom (2).

(b)

Install cylinder pivot pin (13) in attachment

(10.1), boom (2), and cylinder (3).

(c)

Install screw (12) and locknut (11) in cylinder

pivot pin (13).

NOTE

Anytime hydraulic oil has been drained

and changed or maintenance has been

TR0085

performed on hydraulic system, it is

possible that hydraulic pumps have air in

pump cavities. Air must be purged from

cavity before pump will operate (Para

(7)

Purge carriage tilt hydraulic circuit.

(a)

Start engine (TM 10-3930-673-10).

(b)

Purge air from carriage tilt cylinder hydraulic circuit by operating carriage tilt function five times.

(c)

Stop engine and relieve hydraulic pressure by operating carriage tilt controls (TM 10-3930-673-10).

END OF TASK

Change 1

18-85