 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
18-13. FRAME TILT CYLINDER REPLACEMENT (CONT)
(5)
Remove frame tilt cylinder (4) from vehicle
frame (5).
WARNING
Use care when removing snap and
retaining rings. Snap and retaining rings
are under spring tension and can act as
projectiles when released and could cause
severe eye injury.
(a)
Remove retaining ring (11) from rod
TR00510
pivot pin (12).
(b)
With aid of assistant, support frame tilt cylinder (4) and remove rod pivot pin (12).
(c)
Remove frame tilt cylinder (4) from vehicle frame (5).
(6)
Remove four screws (13), lockwashers (14),
13
and two brackets (15) from axle (2). Discard
lockwashers.
b. Installation.
14
(1)
Install two brackets (15) on axle (2) with four
lockwashers (14) and screws (13).
15
TR00511
(2)
Install frame tilt cylinder (4) on vehicle
frame (5).
(a)
Position frame tilt cylinder (4) on vehicle
frame (5) so holes for rod pivot pin (12)
line up.
(b)
Apply anti-seize compound to rod pivot
pin (12) and install.
TR00510
18-78
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals