Removal - TM-10-3930-673-20-20501

TM 10-3930-673-20-2

b. Removal.

(1)

Remove reservoir (2) from side console (3).

NOTE

To prevent spillage of washer fluid,

ensure reservoir is emptied before

removal.

(a)

Tag, mark, and disconnect electrical wire

(4) from resistor (5).

(b)

Remove screw (6), starwasher (7),

electrical wire (8) and other starwasher

(7) from side console (3). Discard

starwashers.

(c)

Remove hose (9) from bottom of

reservoir (2).

(d)

Remove tee (10), hose (11), and hose (12)

from hose (9).

TR00490

NOTE

Support reservoir so reservoir does not drop

when screws and lockwashers are removed in Step (1)(e) below.

(e)

Remove four screws (13), lockwashers (14), and reservoir (2) from side console (3). Discard lockwashers.

(2)

Remove resistor (5) from side console (3).

(a)

Tag, mark, and disconnect electrical wire

(15) from resistor (5).

NOTE

Nuts in Step (2)(b) below are accessed

through opening in side console where

electric joystick was removed.

(b)

Remove two locknuts (16), screws (17)

and resistor (5) from side console (3).

Discard locknuts.

TR00491

17-13