Installation - TM-10-3930-673-20-20499

TM 10-3930-673-20-2

b. Installation.

NOTE

Electrical connections to motor must be made before mounting motor on cab.

(1)

Connect three electrical wires (11) on cab wiring harness (12) and position rear wiper motor (2) on cab (8).

(a)

Connect three electrical wires (11) on shaft side of motor (2) on vehicle wiring harness (12).

(b)

Position and support motor (2) on cab (8).

(2)

Install rear wiper motor (2) mounting hardware (parts 3 through 10) and rear wiper arm (1).

(a)

Install motor (2) on cab (8) with lockwasher (10) and screw (9).

(b)

Install washer (6) and nut (5).

(c)

If removed, install wiper blade (4) on wiper arm (1) with nut (3).

(d)

Install wiper arm (1) on shaft of rear wiper motor (2).

NOTE

Follow-on Maintenance: Connect negative battery cable (Para 8-44).

END OF TASK

17-11