Installation - TM-10-3930-673-20-20475

TM 10-3930-673-20-2

b. Installation.

(1)

Clean and prepare surface of cab (4) and skylight window (5).

(a)

Remove pieces of old window glass from surface of cab (4) around skylight window opening. Ensure

surface is clean and dry.

(b)

Apply metal primer with brush to surface of cab (4) around skylight window opening. Allow ten minutes for

primer to dry.

(c)

Thoroughly clean skylight window (5) with ammonia water.

(d)

Apply ribbon sealer on skylight window (5) even with outside edge of glass.

(2)

Install skylight window (5) on cab (4).

(a)

Set window (5) in place.

(b)

Deleted.

(c)

Apply urethane sealant around perimeter of skylight window (5).

(3)

Install skylight window guard (3) on cab (4).

(a)

Position skylight window guard (3) over cab (4) skylight window opening.

(b)

Install skylight window guard (3) on cab (4) with six washers (2) and screws (1).

END OF TASK

Change 1

16-23