 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
(c)
Check brake pads (1) for oil or grease.
Clean pads with denatured alcohol or by
burnishing. Replace pads if grease or oil
cannot be removed.
TR00714
NOTE
Cracks on surface of pads are normal
when brakes are used under high
temperature conditions.
(d)
Check brake pads (1) for cracks. Replace
pads if necessary.
TR00715
c. Installation.
CAUTION
Always replace both brake pads as a set.
If only one pad is replaced, possible rotor
damage can occur.
(1)
Install brake pads (1) in brake caliper (2).
(a)
Position brake pads (1) in brake caliper
(2).
(b)
Position two brackets (4) on brake caliper
(2).
TR00716
(c)
Apply sealing compound to threads of
four screws (3).
(d)
Install two brackets (4) with four screws (3). Tighten screws to 170 lb-ft (230.5 Nm).
(e)
Ensure that brake pads (1) move freely in brake caliper (2).
(2)
Bleed air from brake system (Para 12-5).
12-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals