Disassembly - TM-10-3930-673-20-20365

TM 10-3930-673-20-2

(2)

Remove drive shaft assembly (parts 1 and 2)

from engine dampener (8).

(a)

Remove three screws (9) from engine

coupling (10).

(b)

Temporarily install two screws (9)

removed in step (2)(a) above in jacking

holes (11) of engine coupling (10).

(c)

Tighten two screws (9) evenly until drive

shaft engine end (2) and engine coupling

(10) separate from engine dampener (8).

(d)

Remove engine coupling (10) and drive

shaft assembly (parts 1 and 2) from

vehicle.

TR00571

b. Disassembly.

(1)

Remove engine coupling (10) from drive shaft

engine end (2).

(a)

Remove two screws (9) from jacking

holes (11).

(b)

Remove coupling (10) from drive shaft

engine end (2).

(c)

Remove key (12) from keyway of drive

shaft engine end (2).

(d)

Remove key (13) from keyway of

coupling (10).

(2)

Remove universal joint (6) from drive shaft

transmission end (1).

(a)

Remove four screws (14), lockwashers

(15), and universal joint (6) from yoke

(16) of drive shaft transmission end (1).

Discard lockwashers.

(b)

Separate universal joint (6) from yoke

(16).

TR00572

(c)

Remove grease fitting (17) from universal

joint (6).

(3)

Separate drive shaft engine end (2) and drive shaft transmission end (1).

(a)

Remove seal (18) from drive shaft transmission end (1). Discard seal.

(b)

Remove drive shaft engine end (2) from drive shaft transmission end (1).

(4)

Remove grease fitting (19) from drive shaft transmission end (1).

10-7