 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
9-5. TRANSMISSION DISCONNECT MASTER CYLINDER ASSEMBLY
REPLACEMENT (CONT)
16
18
7
17
5
13
4
14
6
TR00737
15
(5)
Install clevis (6) on pedal arm (7) with clevis pin (5) and cotter pin (4).
(a)
Rotate pushrod (15) and/or clevis (6) in or out as required until clevis pin (5) fits freely through holes on
clevis (6) and pedal arm (7).
(b)
Install clevis (6) on pedal arm (7) with clevis pin (5) and cotter pin (4).
(c)
Tighten jam nuts (13 and 14).
(6)
Check transmission disconnect setting and adjust if necessary.
(a)
With pedal arms (7 and 16) in full up position, check for 0.06 in. (1.5 mm) gap between head of screw (17)
and pedal arm (16).
(b)
If necessary, loosen nut (18) and adjust screw (17) until proper gap is measured. Tighten nut.
END OF TASK
9-18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals