 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
9-5. TRANSMISSION DISCONNECT MASTER CYLINDER ASSEMBLY
REPLACEMENT (CONT)
(3)
Remove three nuts (8), lockwashers (9),
washer (10), screws (11), and master cylinder
assembly (3) from bracket (12). Discard
11
3
12
10
8
9
TR00561
(4)
Remove jam nuts (13 and 14) and pushrod
6
pin (15) from master cylinder assembly (3).
3
14
(a)
Loosen jam nut (13) on pushrod pin (15).
Remove clevis (6) and jam nut (13) from
13
pushrod pin.
15
(b)
Loosen jam nut (14) on pushrod pin (15).
Remove pushrod pin (15) from master
cylinder assembly (3). Remove jam nut
(14) from pushrod pin.
TR00562
b. Installation.
(1)
Install jam nuts (13 and 14) and pushrod pin (15) on master cylinder assembly (3).
(a)
Install jam nut (14) on pushrod pin (15). Install pushrod pin (15) on master cylinder assembly (3). Do not
tighten.
(b)
Install jam nut (13) and clevis (6) on pushrod pin (15).
9-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals