 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
9-4. TRANSMISSION DISCONNECT AND BRAKE PEDALS
REPLACEMENT/ADJUSTMENT (CONT)
d. Transmission Disconnect Setting
Adjustment. Check transmission disconnect
4
setting and adjust if necessary.
(a)
With pedal arms (3 and 4) in full up
position, check for 0.06 inch (1.5 mm)
29
gap between head of screw (27) and pedal
17
arm (3).
3
43
(b)
If necessary, loosen nut (29) and adjust
27
41
screw (28) until proper gap is measured.
Tighten nut.
15
e. Brake Pedal Linkage Adjustment. Adjust
clevis (19) and pushrod (41) on pedal arm (4).
19
42
28
(a)
Remove cotter pin (15), clevis pin (17),
and clevis (19) from pedal arm (4).
TR00558
Discard cotter pin.
(b)
Loosen jam nuts (42 and 43) on pushrod (41).
(c)
Rotate pushrod (41) and/or clevis (19) in or out as required until clevis pin (17) fits freely through holes on
clevis (19) and pedal arm (4).
(d)
Secure clevis (19) on pedal arm (4) with clevis pin (17) and cotter pin (15).
(e)
Tighten jam nuts (42 and 43).
END OF TASK
9-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals