|
|
TM 10-3930-673-20-2
NOTE
Be sure blackout lights are OFF.
(3)
Loosen nut (4).
(4)
Move backup alarm switch (5) up or down as
required so that backup alarm only sounds
when travel select lever is in the "reverse"
position.
NOTE
If adjustment is successful, perform Steps (5)
through (7) below. If adjustment is
unsuccessful, replace backup alarm switch
(perform b. Removal and c. Installation
below).
(5)
Tighten nut (4).
TR00744
(6)
Install left hand instrument panel (1) on
3
front console (2).
1
Position left hand instrument panel (1) on
console (2) and install four screws (3).
(7)
Connect negative battery cable (Para 8-44).
b. Removal.
2
(1)
Disconnect negative battery cable (Para
(2)
Separate left hand instrument panel (1) from
front console (2).
Remove four screws (3) and lift left hand
instrument panel (1) from console (2).
TR00743
8-107
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |