Installation - TM-10-3930-673-20-20249

TM 10-3930-673-20-2

b. Installation.

(1)

Install front composite light (3) or rear composite light (4) on bracket (10) with ground wires (9) and

mounting hardware (parts 5 through 8).

(a)

Apply sealing compound on threads of screws (5 and 7).

(b)

Position composite light (3 or 4) on light bracket (10) and install composite light with starwasher (8) and

screw (7).

(c)

Rear composite light (4): install starwasher (6), ground wire (9), other starwasher (6) and screw (5).

(d)

Front composite light (3): install starwasher (6), two ground wires (9), starwasher (6) and screw (5).

NOTE

Install tie wraps as necessary.

(2)

Connect vehicle wiring harness connectors (1) on connectors (2) of front composite light (3) or rear

composite light (4).

(3)

Connect negative battery cable (Para 8-44).

c. Bulb Replacement.

(1)

Loosen five screws (11) and remove lens (12)

and gasket (13) from composite light (3 or 4).

(2)

Remove bulb (14) from socket (15).

Carefully push and twist bulb (14)

counterclockwise until bulb releases from

socket (15). Discard bulb.

(3)

Install bulb (14) in socket (15).

Carefully push and twist bulb (14) clockwise in

socket (15) until bulb locks in place.

(4)

Install gasket (13) and lens (12) in composite

light (3 or 4) and tighten five screws (11).

NOTE

Follow-on Maintenance: Connect negative

battery cable (Para 8-44).

END OF TASK

TR00968

8-95