 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
8-31. FLOODLIGHTS AND SPOTLIGHTS REPLACEMENT/REPAIR (CONT)
b. Installation of Floodlights.
(1)
Install floodlight (3) on vehicle and install
mounting hardware (parts 4 and 5).
(a)
Position floodlight (3) on vehicle.
(b)
Install floodlight on vehicle with
lockwasher (5) and nut (4). Tighten nut on
front floodlight to 30 lb-ft (40 Nm).
Tighten nut on rear floodlight to 50 lb-ft
(68 Nm).
(2)
Connect two floodlight connectors (1) to
vehicle wiring harness connectors (2).
(3)
Connect negative battery cable (Para 8-44).
c. Removal of Spotlights.
NOTE
There are two spotlights. Spotlights are
located at top front of cab on either side of
front windshield.
(1)
Disconnect spotlight connector (6) from
vehicle wiring harness connector (7).
(2)
Mark position, loosen mounting hardware
(parts 8 through 15) and remove spotlight
(16) from cab (17).
(a)
From outside cab (17), loosen setscrew
(8) on bracket (9). Loosen setscrew (10)
on spotlight (16).
(b)
From inside cab (17), loosen setscrew
(11) on collar (12).
(c)
From inside cab (17), loosen screw (13),
and remove handle (14) of spotlight (16)
from shaft (15).
(d)
Remove spotlight (16) with shaft (15)
from outside of cab (17) as an assembly.
8-88
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals