 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
8-12. TURN SIGNAL SWITCH REPLACEMENT (CONT)
(a)
Remove four screws (7) and access cover (8) from front console (9).
(b)
Tag, mark, and disconnect four connectors (10) of switch cable (5) from connectors (11) of vehicle wiring
harness (6).
(3)
Remove turn signal switch cable (5) and turn signal switch (3) from steering column (4) and front console
(9).
(a)
Support turn signal switch (3) so switch does not drop during switch cable (5) removal.
(b)
From top of front console (9), remove switch cable (5) through console. Remove turn signal switch (3) and
switch cable (5) as an assembly.
(c)
Remove grommet (12) from front console (9).
b. Installation.
5
9
(1)
Position turn signal switch cable (5) through
12
front console (9).
(a)
Install grommet (12) in front console (9).
3
(b)
From top of front console (9), install turn
signal switch cable (5) through console.
(2)
Connect turn signal switch cable (5) to
2
vehicle wiring harness (6).
4
1
(a)
Connect four connectors (10) of switch
cable (5) to connectors (11) of vehicle
wiring harness (6).
(b)
Apply sealing compound to threads of
9
four screws (7).
(c)
Install access cover (8) on front console
(9) with four screws (7).
(3)
Install turn signal switch (3) on steering
11
7
column (4).
8
(a)
Position and support turn signal switch
5
(3) on steering column (4).
10
6
(b)
Install turn signal switch (3) on steering
column (4) with three-piece clamp (2) and
TR00314
two screws (1).
(4)
Check turn signal operation.
(a)
Connect negative battery cable (Para 8-44).
8-34
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals