Installation - TM-10-3930-673-20-20159

TM 10-3930-673-20-2

(6)

Remove nut (24), washer (25), alternator

pulley (14), and fan (26) from alternator (4).

b. Installation.

(1)

Install fan (26) and alternator pulley (14) on

shaft of alternator (4) with washer (25) and

nut (24). Tighten nut to 75 lb-ft (101.9 Nm).

TR00860

(2)

Install alternator brace (15) on engine (22)

with screw (23). Do not tighten.

(3)

Install alternator support (16) on engine (22)

with three screws (21). Tighten screws to 18

lb-ft (24.4 Nm).

(4)

Install alternator (4) on alternator brace (15)

and alternator support (16).

(a)

Align upper mounting holes of alternator

(4) with alternator support (16) and install

screw (19) and nut (20). Do not tighten.

(b)

Align lower mounting hole of alternator

(4) with alternator brace (15) and install

two starwashers (18) and screw (17).

Tighten screw (17) to between 60 and

70 lb-ft. (81.3 - 94.9 Nm).

(c)

Tighten screw (23) to 32 lb-ft (43.4 Nm).

(d)

Tighten nut (20) to 57 lb-ft (77.3 Nm).

TR00859

8-5