 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
7-10. OVERFLOW TANK REPLACEMENT (CONT)
b. Installation.
(1)
Install coolant overflow tank (1) on frame
(4).
10
(a)
Install hose (8) on top of tank (1).
(b)
Install tank (1) on frame (4) with clamp
11
(7), four washers (6), and locknuts (5).
(c)
Install hose (3) and clamp (2) on bottom
of tank (1).
TR00789
(d)
Position hose (8) through clamp (7).
(2)
Fill coolant overflow tank (1).
NOTE
A 50-50 mixture of ethylene glycol and clean
TR00003
water is used in the ATLAS. Use of plain water
coolant is not recommended. Never add coolant
9
without first diluting to a 50-50 mixture.
1
(a)
Open overflow tank cap (9).
(b)
Add two quarts of coolant to overflow
8
tank (1).
(c)
Close overflow tank cap (9).
5
(d)
Slowly remove radiator cap (10) from
radiator (11) and allow pressure to escape.
(e)
Add coolant to radiator (11) as necessary,
6
until coolant level reaches bottom of filler
neck.
3
7
2
4
(f)
Install radiator cap (10) on radiator (11).
TR00788
END OF TASK
7-42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals