 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
(2)
Loosen six nuts (4) and remove fuel tubes (2)
6
from fuel injection pump (5).
6
7
7
NOTE
If removal of fuel tubes as a unit is
desired, go on to Step (5) below.
(3)
Remove two screws (6) from brackets (7).
(4)
Remove six fuel tubes (2) from engine (8) as
an assembly.
2
8
4
5
TR00349
(5)
Remove four screws (9), two brackets (10),
17
16
two brackets (7) and four inner brackets (11)
15
from six fuel tubes (2).
(6)
Remove four screws (12), four brackets (13),
and eight inner brackets (14) from six fuel
13
7
tubes (2).
10
2
(7)
Remove screw (15), two brackets (16), and
11
two inner brackets (17) from two fuel
tubes (2).
11
b. Installation.
9
14
CAUTION
14
12
Fuel tubes are not interchangeable. To
ensure proper engine operation, connect
fuel tubes to fuel injectors and fuel
injection pump ports as noted during
removal. Do not weld or substitute fuel
TR00350
tubes or damage to equipment could
result.
(1)
Install two fuel tubes (2) in two inner brackets (17), and two brackets (16) with screw (15).
(2)
Install eight inner brackets (14) and four brackets (13) on six fuel tubes (2) with four screws (12).
(3)
Install four inner brackets (11), two brackets (7), and two brackets (10) on six fuel tubes (2) with four screws
(9).
5-11. HIGH PRESSURE FUEL HOSES AND TUBES REPLACEMENT (CONT)
5-29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals